Brother DCP-9042CDN Quick Setup Manual page 23

Installing the Driver & Software
5
The Brother software will search for the Brother
device. During this time the following screen
will appear.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step 6.
• If this screen appears click OK.
Enter a name for your Macintosh
Display Name up to 15 characters long and click
OK. Go to step 6.
The name can be any name you want.
• The name you enter will appear on the machine's
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning in the Software User's Guide on the CD-
ROM.)
6
7
8
®
in
9
When this screen appears, click OK.
®
For Mac OS X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 11.
®
For Mac OS X 10.2.4 to 10.2.8 users:
Click Add.
®
For Mac OS X 10.2.4 to 10.2.8 users:
Make the selection shown below.
Choose your model name, and then click Add.
®
Macintosh
21