Error Codes - Konica Minolta bizhub 350 Operation Manual

5

Error codes

If an error occurred while an operation was being performed, an error code
appears in the Job List screen or in a report. Perform the operations de-
scribed below.
Error code
EF09CD
EE09CE
EF09D0
EF09D1
EF09D2
5-4
Cause
The memory has become full.
The hard disk is full.
The file name was specified
using prohibited characters.
The box cannot be accessed.
The amount of data in the
specified box has reached the
maximum allowed.
Remedy
Increase the machine's memory or change
the scan settings.
Delete unnecessary documents from the hard
disk, and then try sending again.
Type in the file name correctly.
Check that the box has not been deleted.
A maximum of 100 documents can be saved
in a single box. Delete unnecessary docu-
ments from the box, and then try sending
again.
Appendix
200/250/350