Worcester GREENSTAR 24i Junior Installation Instructions Manual page 49

BURNER REMOVAL
Refer to figure 81
1. Remove clamping plate.
2. Remove spark/flame electrode assembly and seal
from the top of the heat exchanger.
3. Remove burner.
1.
3.
Fig. 81 Burner removal
Checking and cleaning the electrode assembly:
NOTICE: Cleaning
B Do not use wire wool to clean the
electrodes.
B Inspect the condition of the electrodes and ceramics,
replace if necessary.
B Use a plastic scouring pad to clean the electrodes.
6 720 644 741a (2010/10)
BAFFLE REMOVAL
Refer to figure 82.
1. Remove top baffle.
2. Remove lower baffle.
2.
Fig. 82 Baffle removal
SERVICE AND SPARES
If the lower baffle is stuck, it may be
necessary to use the "baffle removal tool"
from the heat exchanger cleaning kit
- 7 716 192 312, as shown in figure 82.
1.
2.
49