Konica Minolta PS5000C MKII Operator's Manual page 41

Place the "White Paper" on the cradle as shown below with the white surface
2
facing the front.
If the glass plate unit has been attached, place "White Paper" on the glass.
Select "4. White Shading" on the pull-down list under "Adjustment", and then
3
click "Start".
Click "OK" on the confirmation screen to confirm the inability of User
4
Account Control during the adjustment.
The window indicating that adjustment is underway will appear. When the
5
window disappears, the adjustment is completed. Proceed to the next
adjustment, "2.6 White Balance".
Chapter 3 PS5000C MKII Twain Driver
Adjust the edge of
the paper to the
outside of the outer
cover
3-15