Konica Minolta PS5000C MKII Operator's Manual page 32

PS5000C MKII Operator's Manual
11
12
13
14
NOTE !
3-6
Turn the power switch of the Scanner ON.
Determine the Driver in accordance with the instructions in the search wizard.
When the "Found New Hardware" screen appears, select "Locate and install
driver software".
Select "Install this driver software anyway".
The installation of the Driver is completed.
After the installation of the Driver is completed, start the Scanner setup.
In order to read the screen properly, be sure to set up the Scanner.
For the procedure for setting up the Scanner, refer to the Chapter 3,
"2 Setup of the Scanner".