Quick Start Guide - Quadra-Fire MTV-E2-CSB Owner's Manual

MT. VERNON E2
D. Quick Start Guide
1. Empty Firebox
2.
3.
4.
5.
6.
•
1. After the exhaust blower has stopped; quickly turn the dial from OFF to HI
two times
• The LIGHT will turn solid green and pellets will feed. Wait for 2 minutes
• If the LIGHT did not turn solid green:
1. Choose Mode:
-pick "Temp"
6
Add pellets and close lid
Turn DIAL to OFF
Plug in the appliance
• Exhaust blower will run for about 45 Seconds (wait for it to stop
before priming)
• Green light will start fl ashing
Put batteries in the Touch Screen Remote Thermostat
Press the MODE button on the remote thermostat until ON appears
in the upperleft corner
You should hear an audible tone from the appliance
LO
- Turn dial back to OFF
- Unplug appliance, plug it back in and repeat
Priming is only needed for fi rst fi re or starting fi re on empty hopper.
ON
or
THERM
Touch Screen
Remote Thermostat
LO
HI
2. Choose Setting:
LO – HI*
Green LIGHT will be-
gin fl ashing and stove
will start
It may take as long as 10
minutes to achieve a fi re
in the fi repot. Turning the
knob or thermostat to off
during this time will inter-
rupt the startup process.
MODE/SET
*For fi rst fi re,
HHT recommends
running on HI for
fi rst 30 minutes
7080-132D
LO
HI HI
LO
Control Panel
Light
Dial
HI
Trim
October 27, 2014