Quick Start Guide - Quadra-Fire MTVERNON-AE-MBK Owner's Manual

R
R R
L. Quick Start Guide
Any button pressed will turn on the backlight. Wall control will automati-
NOTICE:
cally revert back to the starting screen if there is no activity for 15 seconds; except
for the "CONFIRM FUEL CHANGE" screen.
Buttons
READY 12:30 PM
73
Set at: 73
Room
Temp
MENU
HEAT OUTPUT
Function Buttons
Wall Control for Reference
TURNING ON APPLIANCE
12:30 PM
READY
71
Set at: 68
MENU
1. At the starting screen, press "MENU".
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
. Highlight "AUTO/MANUAL/OFF".
Press "SELECT".
AUTO/MANUAL SETTINGS
Automatic
Manual
Manual
Off
. Highlight "MANUAL". Press "SELECT
Press "DONE" twice or wait 15 sec-
4.
onds for starting screen to re-ap-
pear.
August 13, 2009
CHOOSING FUEL TYPE
Up
Down
1. At the starting screen, press "MENU"
button once or twice until "MENU"
screen appears.
. Highlight "FUEL TYPE" using the "UP/
DOWN" buttons to the right side of the
display. Press "SELECT".
. Scroll down and highlight "HARD-
WOOD PELLET" or your fuel type.
. Now press "SELECT" to choose new
fuel.
".
5. Press
change.
6. Press "DONE" twice or wait 15 sec-
onds for starting screen to reap-
pear.
7. Fill the hopper with fuel. If the hop-
per was completely empty or has run
out of fuel, put approximately 1/ cup
of pellets into the firepot for a quick
restart.
8. Be sure the hopper lid and glass
door are both closed.
READY 12:30 PM
71
Set at: 68
MENU
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
FUEL SELECTION
Softwood Pellet
Sunflower Seeds
Wheat
Hardwood Pellet
CONFIRM FUEL CHANGE
Please empty hopper
of old fuel type and
ensure firebox is clean.
Please refer to
section 8 in manual.
DONE
"DONE" to confirm
7034-106F
Mt. Vernon Pellet Stove (AE)
CHOOSING TEMP UNIT:
°F or °C
READY
71
MENU
1. At the starting screen, press "MENU"
button once or twice until "MENU"
screen appears.
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
. Highlight "USER SETTINGS" using the
"UP/DOWN" buttons to the right side of
the display. Press "SELECT".
USER SETTINGS
Temp Units F/C
Flame Height Adjust
Temp Differential
. Highlight "TEMP UNITS F/C" using the
"UP/DOWN" buttons to the right side of
the display. Press "SELECT".
fuel
. Press the "UP" or "DOWN" button
to set desired temperature unit and
press "SELECT"..
5. Press "DONE" twice again, or wait 15
seconds for starting screen to re-ap-
pear.
12:30 PM
Set at: 68
Page 9