Table of Contents
Advertisement
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT DISCARD THIS MANUAL
MT. VERNON E2 PELLET STOVE
MODEL(S):
MTV-E2-CSB-C
MTV-E2-PFT-C
MTV-E2-PBK-C
f i r e - p a r t s . c o m
MTV-E2-MBK-C
MTV-E2-PDB-C
MTV-E2-PMH-C
To obtain a French translation of this manual, please
contact your dealer or visit www.quadrafire.com
00Pour obtenir une traduction française de ce manuel,
s'il vous plaît contacter votre revendeur ou visitez www.
quadrafire.com
1
Owner's Manual
Operation & Care
NOTE
Please read this entire manual before use of
this pellet fuel-burning room heater. Failure to
follow these instructions could result in property
damage, bodily injury, or death.
•
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
•
Do NOT burn garbage or flammable fluids such as
gasoline, naphtha, or engine oil in room heater.
•
Do not over fire - If heater or chimney connector
glows, you are over firing. Over firing will void your
warranty.
•
Comply with all minimum clearances to combustibles
as specified. Failure to comply may cause house fire.
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
•
Do not touch glass until it is cooled
•
NEVER allow children to touch glass
•
Keep children away
•
CAREFULLY SUPERVISE children in same room as
fireplace.
•
Alert children and adults to hazards of high
temperatures
•
High temperatures may ignite clothing or other
flammable materials.
•
Keep clothing, furniture, draperies and other
flammable materials away.
Tested and approved for wood pellets only. Burning of
any other type of fuel voids your warranty.
Check building codes prior to installation.
•
Installation MUST comply with local, regional, state
and national codes and regulations.
•
Consult local building, fire officials or authorities
having jurisdiction about restrictions, installation
inspection, and permits.
7080-163D
WARNING
WARNING
CAUTION
CAUTION
August 3, 2018
Advertisement
Table of Contents
Related Manuals for Quadra-Fire MT. VERNON E2 Series
Summary of Contents for Quadra-Fire MT. VERNON E2 Series
- Page 1 Owner’s Manual Operation & Care INSTALLER: Leave this manual with party responsible for use and operation. OWNER: Retain this manual for future reference. Contact your dealer with questions regarding installation, operation or service. WARNING NOTICE: DO NOT DISCARD THIS MANUAL Please read this entire manual before use of this pellet fuel-burning room heater.
-
Page 2: Sample Of Serial Number / Safety Label
MT. VERNON E2-C ITEM PART NUMBER 7080-149 NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction A. Sample of Serial Number / Safety Label LOCATION: Back of Stove CAUTION: HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. -
Page 3: Table Of Contents
W. Thermostat Battery Replacement ... . . 19 X. Frequently Asked Questions ....20 Quadra-Fire is a registered trademark of Hearth & Home Technologies. August 3, 2018... -
Page 4: Warranty Policy
MT. VERNON E2-C B. Warranty Policy Hearth & Home Technologies LIMITED LIFETIME WARRANTY Hearth & Home Technologies, on behalf of its hearth brands (“HHT”), extends the following warranty for HHT gas, wood, pellet and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: WARRANTY PERIOD: distributor, whichever occurs earlier. - Page 5 MT. VERNON E2-C WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • • This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides. •...
- Page 6 MT. VERNON E2-C This warranty is void if: • • • There is any damage to the appliance or other components due to water or weather damage which is the result of, but not limited LIMITATIONS OF LIABILITY • have other rights, which vary from state to state. EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY SPECIFIED HEREIN.
-
Page 7: Quick Start Guide
MT. VERNON E2-C C. Quick Start Guide QUICK START GUIDE *Before you plug in this appliance, follow these instructions* 1. Empty Fire box 2. Add pellets and close lid 3. Turn DIAL to OFF 4. Plug in the appliance • Exhaust blower will run for about 45 Seconds (wait for it to stop before priming) •... -
Page 8: Listing And Code Approvals
NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM E1059-12, ULC S627-00, (UM) 84-HUD and ULC/ORD-C-1482. The Quadra-Fire Mt. Vernon E2 Pellet Appliance meets the U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with 2020 particulate emission standards at 0.74 G/HR EPA CFR subpart AAA, using ASTM E2779-10, ASTM 2515-11 Method- Pellet Appliance sections, CSA B415.1-10. -
Page 9: Glass Specifications
MT. VERNON E2-C C. Glass Specifications WARNING This stove is equipped with 5mm ceramic glass. Replace Fire Risk. glass only with 5mm ceramic glass. Please contact your Hearth & Home Technologies disclaims any dealer for replacement glass. responsibility for, and the warranty will be voided D. -
Page 10: Operating Instructions
MT. VERNON E2-C User Guide Operating Instructions Fuel Material WARNING • Made from sawdust or wood by-products • Depending on the source material it may have a high or Fire Risk. low ash content. • Do not operate appliance before reading and understanding operating instructions. -
Page 11: Before Your First Fire
MT. VERNON E2-C G. User Dial Control Performance • Higher ash content requires the ash drawer to be The appliance has one dial control located on the side of emptied more frequently the unit (behind a drop door) used for changing the heat •... -
Page 12: Fire Pot Purge
MT. VERNON E2-C J. Fire pot Purge L. Restarting the Appliance Purpose: To help remove debris from the fire pot and help Restart Process the unit burn as efficient as possible. 1. When the unit has run out of fuel and the “empty hopper”... -
Page 13: Clear Space
MT. VERNON E2-C N. Clear Space O. Trim Adjustment Mantel: Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. NOTICE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction. -
Page 14: Your Pellet Appliance's General Operating Parts
MT. VERNON E2-C P. Your Pellet Appliance’s General Operating Parts Baffle Latch Hopper Switch Dial Control f i r e - p a r t s . c o m Ash Dump Lever Baffle Firepot 7080-163D August 3, 2018... -
Page 15: Led Color Coding Chart And Explanation
MT. VERNON E2-C Q. LED Color Coding Chart and Explanation The number of flashes between pauses is per one second unless otherwise indicated. No. of Flashes Description Notes Color between pauses Steady ON while Feed Motor is running When priming the feed system and filling the fire pot, DO priming feed tube Green continuously. -
Page 16: Thermostat Controls
MT. VERNON E2-C R. Thermostat Controls S. Thermostat Setup Options TEMPERATURE (HEAT / OFF) SWITCH: Setup options for how the thermostat will function are Set this switch to HEAT to control your appliance. The off performed using a menu on the display screen. position will disable the appliance. -
Page 17: Thermostat Operation Instructions
MT. VERNON E2-C ITEM #08 (TEMPERATURE DIFFERENTIAL): TEMPERATURE HOLD: • The thermostat works by turning your heating system Temperature hold is used for maintaining a fixed set on and off whenever the room temperature varies from temperature; once a HOLD is initiated, the thermostat will the desired set-point temperature. -
Page 18: Thermostat Other Features
MT. VERNON E2-C COPY PROGRAM FEATURE: KEYPAD LOCKOUT: SET TEMPERATURE There is the option to lock the front panel buttons to prevent Using similar instructions as PROGRAMS unauthorized tampering of your thermostat settings. the COPY button will allow a whole day of set program events to be copied to another day. -
Page 19: Thermostat Battery Replacement
MT. VERNON E2-C SOFTWARE RESET: CONNECT THERMOSTAT WIRES TO APPLIANCE: Software reset is used to erase ALL temperature events, There is a 4 screw terminal block located on the back lower and to return all user-adjustable software settings back to left corner of the stove directly above the power cord inlet. -
Page 20: Frequently Asked Questions
MT. VERNON E2-C X. Frequently Asked Questions tion cap. Check to be sure the venting is installed per the owner’s manual and local codes. What causes my glass to become dirty? Do I need an outside air kit? If the glass has white ash build up it is normal and the Outside air is required for mobile home installs and in some glass should be cleaned. -
Page 21: Maintenance And Service
MT. VERNON E2-C Maintenance and Service When properly maintained, your appliance will give CAUTION you many years of trouble-free service. Contact your dealer to answer questions regarding proper operation, Shock and Smoke Hazard troubleshooting and service for your appliance. Visit •... -
Page 22: General Maintenance And Cleaning
MT. VERNON E2-C 2. Cleaning Ash Pan C. General Maintenance and Cleaning • Frequency: Weekly or every 3-5 bags • By: Homeowner 1. Cleaning Fire pot using Lever a. Locate the ash pan underneath the fire pot. • Frequency: Weekly or as needed* b. - Page 23 MT. VERNON E2-C Cleaning Heat Exchanger & Drop Tube (cont.) Tools Needed: A Shop Vacuum and generic micro cleaning kit; flat head screwdriver; bottle brush, ½” ID hose. a. It is necessary to remove the baffle to gain access to the heat exchanger (Figure 23.2).
- Page 24 MT. VERNON E2-C 5. Ash Removal System Inspection & Cleaning 7. Cleaning the Glass • Frequency: Monthly or after burning 50 bags • Frequency: See chart on page 21 • By: Homeowner • By: Homeowner a. Be sure the appliance is allowed to cool. a.
-
Page 25: Soot Or Creosote Fire Awareness
MT. VERNON E2-C 9. Cleaning Exhaust System 12. Soot and Fly-ash: Formation & Need for Removal (Requires No Lubrication) in Exhaust Venting System. • Frequency: See chart on page 21 • Frequency: See chart on page 21 • By: Homeowner •... -
Page 26: High Ash Fuel Content Maintenance
MT. VERNON E2-C E. High Ash Fuel Content Maintenance • Frequency: Daily • By: Homeowner Baffle If the ash build-up exceeds the half way point in the fire pot or if clinkers are adhering to the sides of the fire pot, the fire pot floor is not being cycled enough. -
Page 27: Convection Blower Replacement
MT. VERNON E2-C H. Convection Blower Replacement I . Combustion/Exhaust Blower Replacement 1. Follow the proper shut down procedures. 1. Follow the proper shut down procedures. 2. Remove the left side panel by loosening the 2 screws 2. Remove the right side panel by loosening the 2 screws using a Phillips head screw driver or wrench (Figure using a Phillips head screw driver or wrench (Figure 27.1). -
Page 28: Troubleshooting Guide
MT. VERNON E2-C Troubleshooting Guide With proper installation, operation, and maintenance your appliance will provide years of trouble-free service. If you do experience a prob- lem, this troubleshooting guide will assist a qualified service person in the diagnosis of a problem and the corrective action to be taken. This troubleshooting guide can only be used by a qualified service technician. - Page 29 MT. VERNON E2-C Symptom Possible Cause Corrective Action Area where the thermostat is Check thermostat proximity to doors and placed affects temperature. windows Appliance starts and stops frequently when operating in the Thermostat located in tight spaces Inspect thermostat location and make sure it mode effecting the on/off cycling of the is not close to a surface that heats and cools...
- Page 30 MT. VERNON E2-C Symptom Possible Cause Corrective Action Clean unit including the fire pot, exhaust Dirty appliance or venting path, and venting system Purge old fuel and use higher quality / or Poor fuel quality, high ash content. brand of fuel Large, lazy flame (orange color) with black ash / soot buildup on Incorrect air-fuel adjustment...
- Page 31 MT. VERNON E2-C Following correction of any Alarm, turn the dial control to the OFF position, wait 10 seconds and turn back to desired setting OR unplug the unit, wait 10 seconds then restore power. Alarm Possible Cause Corrective Action (LED Flashing RED) Hopper empty Fill the hopper...
-
Page 32: Reference Materials
MT. VERNON E2-C Reference Materials A. Component Functions When describing the location of a component, it is always AS YOU FACE THE FRONT OF THE APPLIANCE. 1. Exhaust Blower The combustion (exhaust) blower is mounted in the bottom 11. Overheat Snap Discs right rear of appliance. -
Page 33: Service And Maintenance Log
MT. VERNON E2-C B. Service and Maintenance Log Date of Service Performed By Description of Service f i r e - p a r t s . c o m August 3, 2018 7080-163D... -
Page 34: Exploded Drawings
MT. VERNON E2-C C. Exploded Drawings f i r e - p a r t s . c o m 7080-163D August 3, 2018... -
Page 35: Parts List
MT. VERNON E2-C D. Parts List f i r e - p a r t s . c o m August 3, 2018 7080-163D... - Page 36 MT. VERNON E2-C f i r e - p a r t s . c o m 7080-163D August 3, 2018...
- Page 37 MT. VERNON E2-C f i r e - p a r t s . c o m August 3, 2018 7080-163D...
- Page 38 MT. VERNON E2-C f i r e - p a r t s . c o m 7080-163D August 3, 2018...
- Page 39 MT. VERNON E2-C f i r e - p a r t s . c o m August 3, 2018 7080-163D...
- Page 40 Hearth & Home Technologies 352 Mountain House Road Halifax, PA 17032 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer log onto www.quadrafire.com CAUTION DO NOT DISCARD THIS MANUAL f i r e - p a r t s .