Mounting The Tv On The Wall; Removing The Stand - Sharp Aquos LC-65RX1X Operation Manual

Appendix

Mounting the TV on the wall

Removing the stand

For wall mounting with the optional bracket (AN-65AG1), remove the stand.
Before detaching/attaching the stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
1 Unfasten the four screws used to secure the
stand in place.
2 Attach the wall mount brackets.
3
Set the TV on the wall.
As the TV is very heavy, be careful not to drop it on a
hard fl oor or on your foot.
NOTE
• To attach the stand, perform the above steps in reverse order.
70
2
1 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
2 Make sure to detach the TV with it tilted slightly
backwards and supporting the knobs on the rear
of the TV while holding the stand.
3 Don't push hard on the speaker cover portion of
the TV.