Sharp AQUOS 09P09-MX-NM Operation Manual

Sharp AQUOS 09P09-MX-NM Operation Manual

Sharp liquid crystal television operation manual
Table of Contents

Advertisement

LC-60E77UN
LC-65E77UM
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT
: Please read this operation manual before starting operating the equipment.
IMPORTANT
: Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

Advertisement

Table of Contents
loading

Summary of Contents for Sharp AQUOS 09P09-MX-NM

  • Page 1 LC-60E77UN LC-65E77UM LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
  • Page 3: Important Information

    LIQUID CRYSTAL TELEVISION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO WARNING: NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
  • Page 4: Trademarks

    • Products that have earned the ENERGY STAR effi ciency. • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too. ®...
  • Page 5: Dear Sharp Customer

    DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,...
  • Page 7: Important Safety Instructions

    • If the panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.
  • Page 8: Table Of Contents

    Trademarks ........2 DEAR SHARP CUSTOMER ..... . . 3 IMPORTANT SAFETY INSTRUCTIONS .
  • Page 9: Quick Reference

    TV POWER on the remote control to turn the power on. IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. 30º Remote control sensor 30º 30º...
  • Page 10: Preparation

    Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
  • Page 11: Part Names

    Part Names TV (Front) TV (Rear/Side) POWER button MENU button INPUT button Channel buttons Volume buttons (VOLk/l) INPUT 5 terminal (HDMI) INPUT 3 terminals SERVICE terminal *1 See pages 11, 12, 13, 14 and 35 for external equipment connection. *2 See page 20 for button operations. *3 See page 7 for connecting the AC cord.
  • Page 12: Remote Control Unit

    Part Names Remote Control Unit • When using the remote control unit, point it at the TV. TV POWER: Switch the TV power on or enter standby. (See page 15.) DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off.
  • Page 13: Connecting To External Equipment

    Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.) For connecting the TV to external equipment, use commercially available cables. CAUTION •...
  • Page 14: Connecting A Vcr, Game Console, Camcorder Or Cable/Satellite Set-Top Box

    Connecting to External Equipment ■ When using Component cable (INPUT 1 or 2): • Blu-ray disc player • DVD player • HD Cable/Satellite set-top box COMPONENT OUT • To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.
  • Page 15: Connecting A Speaker/Amplifi Er

    Connecting to External Equipment Connecting a Speaker/Amplifi er ■ When using optical fi ber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio outputs from the terminal. OPTICAL OPTICAL DIGITAL AUDIO INPUT DIGITAL AUDIO INPUT •...
  • Page 16: Connecting A Pc

    Connecting to External Equipment ■ When using HDMI-DVI conversion cable (INPUT 6): DVI OUT AUDIO • When using an HDMI-DVI conversion cable, you should make an analog audio connection. In this case, in addition to connecting an HDMI-DVI conversion cable to the INPUT 6 (HDMI) terminal, connect an audio cable to the AUDIO terminal and set "PC Audio Select"...
  • Page 17: Watching Tv

    Watching TV Turning On/Off the Power POWER TV POWER (On/Standby) Initial Setup When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press TV POWER on the remote control unit.
  • Page 18: Direct Button Operation

    Direct Button Operation Changing Channels You can change channels by pressing CH • (DOT). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT. To select a 3-digit channel number (e. g., Channel 115): Press 1 ENT.
  • Page 19: Av Mode

    Direct Button Operation AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
  • Page 20: Power Saving

    Direct Button Operation POWER SAVING Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING. • Each time you press POWER SAVING, the mode changes as shown below. Standard Advanced •...
  • Page 21: View Mode

    Direct Button Operation VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. •...
  • Page 22: On-Screen Display Menu

    • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. LCFONT: • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy- to-read characters on LCD screens. Menu Operation Buttons...
  • Page 23: Page

    On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. •...
  • Page 24: Picture Menu

    On-Screen Display Menu Picture Menu Adjusts the picture to your preference with the following picture settings. Example Picture [b12] a16 Backlight Contrast [b30] Brightness Color Tint [ b2] Sharpness Advanced Reset Press MENU to display the MENU screen, and then press c / d to select "Picture".
  • Page 25: Fine Motion Enhanced

    On-Screen Display Menu Fine Motion Enhanced Use Fine Motion Enhanced to view fast-action video more clearly. On: For obtaining a clearer image. Off: Normal image. • Fine Motion Enhanced may cause image noise. If this occurs, turn the function "Off". Active Contrast Automatically adjusts the image contrast according to the scene.
  • Page 26: Audio Menu

    On-Screen Display Menu Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio Treble [ 0] Bass [ 0] Balance [ 0] Surround Bass Enhancer Reset Press MENU to display the MENU screen, and then press c / d to select "Audio".
  • Page 27: Setup Menu

    On-Screen Display Menu Setup Menu Example Setup EZ Setup CH Setup Antenna Setup-DIGITAL Input Skip Parental CTRL Position Language [English] Reset Press MENU to display the MENU screen, and then press c / d to select "Setup". Press a / b to select a specifi c adjustment item, and then press ENTER.
  • Page 28: Parental Ctrl

    On-Screen Display Menu Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. • For resetting adjustments to the factory preset values, press a / b to select "Reset", and then press ENTER.
  • Page 29 On-Screen Display Menu V-Chip V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
  • Page 30 On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
  • Page 31: Option Menu

    On-Screen Display Menu Option Menu Example Option AQUOS LINK Setup Audio Only [Input 4 (PC)] PC Audio Select Auto Volume [Off] Clear Voice [Off] Output Select [Fixed] Caption Setup Digital Caption Info. Program Title Display [No] Favorite CH [Off] Game Play Time [Off] Operation Lock Out [Yes]...
  • Page 32: Color System

    On-Screen Display Menu Color System Select the video signal system compatible with your equipment from the list below: Auto/NTSC/PAL-M/PAL-N • "Color System" can only be set for the INPUT 1 VIDEO, INPUT 2 S-VIDEO and INPUT 3 VIDEO. • If you have already set the Secret No., input the 4-digit secret number here.
  • Page 33: Digital Setup Menu

    SERVICE terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated.
  • Page 34 On-Screen Display Menu Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. During the data checking, “ Checking Now checking the data in the USB memory device. Checking •...
  • Page 35: Other Viewing Options

    Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Presetting manufacturer codes Press FUNCTION until the LED for your device lights up.
  • Page 36 Other Viewing Options Manufacturer codes REMOTE CONTROL CODE VCR BRAND DVD/BD/LD BRAND NUMBER CATV/SAT BRAND • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER...
  • Page 37: Using Aquos Link

    Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to the TV, you can control a recorder or AV amplifi...
  • Page 38: Aquos Link Setup

    Using AQUOS LINK AQUOS LINK Setup Press MENU to display the MENU screen, and then press c / d to select "Option". Press a / b to select “AQUOS LINK Setup”, and then press ENTER. Press a / b to select a specifi c item, and then press ENTER.
  • Page 39: Aquos Link Menu

    Using AQUOS LINK One Touch Playback AQUOS LINK allows you to operate the HDMI- connected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use the following buttons during broadcast viewing.
  • Page 40: Aquos Link Menu

    Using AQUOS LINK Playback of Titles Using AQUOS LINK This section explains how to play back a title in the AQUOS LINK-compatible equipment. Power on the AQUOS LINK-compatible equipment, and select appropriate external input. Press OPTION to display the AQUOS LINK MENU screen.
  • Page 41: Using A Pc

    Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
  • Page 42: Adjusting The Pc Image

    Using a PC Press MENU to display the MENU screen, and then press c / d to select the Setup or Option menu. • For adjusting "Auto Sync." or "Fine Sync.", select the Setup menu. • For setting "PC Audio Select", select the Option menu. Press a / b to select a specifi...
  • Page 43: Rs-232C Port Specifi Cations

    Using a PC RS-232C Port Specifi cations ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers.
  • Page 44: Appendix

    Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-60E77UN) or AN-65AG1 (SHARP) (for LC-65E77UM). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
  • Page 45: Troubleshooting

    Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No sound Possible Solution •...
  • Page 46: Troubleshooting-Digital Broadcasting

    Problem • No picture • The TV sometimes makes a cracking sound. Troubleshooting-Digital Broadcasting The error message about reception of broadcast The example of an error message displayed on a screen • Failed to receive broadcast. • No broadcast now. Cautions regarding use in high and low temperature environments •...
  • Page 47: Specifi Cations

    The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.
  • Page 48: Information On The Software License For This Product

    The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
  • Page 49: Calling For Service

    WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted.
  • Page 50: Dimensional Drawings

    Dimensional Drawings LC60E77UN (1334) LC65E77UM (1432.6) (1438) (400) (1543) (440) Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) (626) AN-52AG4 (135) (119) (446) (119) (186) (626) AN-65AG1 (119) (135) (119) (446) (156) (67) (37)
  • Page 51 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E339WJZZ 09P09-MX-NM...

Table of Contents