Before Turning On The Power - Sharp Aquos LC-65RX1X Operation Manual

Preparation

Before turning on the power

Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
Connecting the antenna cable
1
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
2
Connecting external devices
See pages 12 and 13 for connecting external equipment, such as a VCR and DVD player.
Connecting the AC cord
3
CAUTION
• Do not use a power cord other than the one supplied
with the TV.
Be sure to use a power outlet of
AC 110-240 V, 50/60 Hz.
Using power supply other than the one
specifi ed may cause fi re.
• Place the TV close to the AC outlet, and keep the
power plug within reach.
• This product must only be connected to an AC
110-240 V, 50/60 Hz, grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage
the product and invalidate the warranty.
• Disconnect the AC cord from the AC outlet if the TV
will not be used for a long period of time.
Bundling the cables
4
Insert the cable clamp in the hole on the TV as shown.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Antenna cable
(commercially available)
To antenna
terminal
Plug the power cord (supplied) into the AC
1
input terminal.
Plug the power cord (supplied) into the AC
2
power outlet.
Cable clamp
9