Adj 3.2.1 Margins (Side-To-Side And Top-To-Bottom) (C55/C55Mp) - Xerox DocuPrint C55 Service Manual

ADJ 3.2.1 MARGINS (SIDE-TO SIDE
and TOP-TO-BOTTOM)
(C55/C55mp)
PURPOSE:
To adjust the top and left margins (with
respect to a portrait page) using the Control
Panel.
CHECK:
1. Run a print of Test Pattern A.
a. Put the printer in the Off Line mode by
pressing the On Line button.
b. Press Menu and then
Previous/Next buttons to scroll to
SERVICE. Press Enter.
c. When TEST PATTERNS is displayed,
press Enter.
d. Use Previous/Next to
PATTERN TYPE. Press Enter.
e. When PCL is displayed, press Enter.
f. When TEST PATTERN A is displayed,
press Enter.
g. Use Previous/Next to scroll to RUN
TEST JOB. Press Enter.
h. When YES is displayed press Enter to
print Test Pattern A.
2. Figure 1: Measure the Margins.
a. The distance from the Lead Edge of the
copy paper to the 8 mm line should be
8 mm.
b. The distance from the Side Edge of the
copy paper to the 8 mm line should be
8 mm.
REPAIRS/ADJUSTMENTS
ADJ 3.2.1
Side Edge
use the
Figure 1. Margins Measurement
scroll to
ADJUSTMENT:
1. Access the adjustment menu.
Lead Edge
8 mm
2. Perform the CHECK.
2/99
4-60
a. Put the printer in the Off Line mode by
pressing the On Line button.
b. Press Menu and then use
Previous/Next buttons to scroll to
SERVICE. Press Enter.
c. Use Previous/Next to scroll
ADJUSTMENTS. Press Enter.
d. Use Previous/Next to scroll to LEFT
MARGIN OR TOP MARGIN.
Enter.
e. Use Previous/Next to change the
margin value (+) increases the margin
(− ) decreases the margin. The value
can be varied ± 4 mm. Press Enter
when the adjustment is complete.
DocuPrint C55/C55mp
the
to
Press