Signal Continuation/Flow
Indicates the continuation of a signal
line
interrupted
in
a
direction.
Represents the continuation of a
standby power line interrupted in the
vertical direction.
In all cases, the
supply is from Standby Power
Indicates a feedback signal.
Indicates a common splice of wires.
Indicates a common splice of wires at
P/J57
6
a pin.
Indicates the direction of signal flow.
Indicates that the wire continues to
the adjacent page.
INTRODUCTION
Tag Identification
This WITH TAG Symbol is used to
47
horizontal
identify the components or configura-
47
tion that are part of a printer change
covered by the Tag number.
This WITHOUT TAG Symbol is used
47
to
identify
configuration that are not part of a
47
printer change covered by the Tag
number
the
components
or
2/99
iv
DocuPrint C55/C55mp/[NC60]