5. Install the Fuser components:
a. Press the green release button located
just behind the right side of the front
cover to open the cover. This is where
the fuser is located.
b. Pull on the gold string to remove the gold
plastic pins from the fuser.
DocuPrint C55/C55mp/[NC60]
c. Remove the Oil Bottle from the plastic
bag and pull off the cap.
second oil bottle for use when the printer
warns you that the oil is low.
18
d. Insert the oil bottle into the top of the
fuser and click into place.
19
2/99
6-59
e. Remove the roller from the plastic bag,
insert it into the top of the fuser, align the
Save the
arrow on the roller to the arrow on the
fuser and lock it in place by rotating
toward you.
20
f.
Close the fuser top. If the top does not
close easily, check to see if the cleaner
roller is installed properly and locked in
place.
21
22
GENERAL PROCEDURES
GP 15.1 INSTALL