Booklet Printing - Xerox Phaser 7300 Features Manual

Booklet printing

If your printer has a duplex unit installed, you can print a document in the form of a small book. The
driver automatically reduces each page image by 50 percent and prints two pages per sheet of paper.
The pages are printed in the correct order so that you can fold and staple the pages to create a booklet.
Note
You can create booklets for any paper size that is supported for 2-sided (duplex) printing.
When you choose to print booklets, you can also specify the creep and gutter in the Windows 95 /
Windows 98 / Windows Me driver. The gutter is the horizontal distance from the fold to the page image
(in points). The creep is the distance that page images are shifted inward (in 10ths of a point); this
compensates for the thickness of the folded paper, which otherwise would cause the inner page images
to shift slightly outward.
Gutter
To select booklet printing in a supported Windows driver:
Windows 95 / Windows 98 /Windows Me PostScript driver:
I
On the Setup tab, click More Layout Options, then check Print Booklet Style in the
More Layout Options box. You can also specify the creep and gutter in this box.
Windows 2000 / Windows XP PostScript driver:
I
On the Layout tab, choose Booklet from the Pages per Sheet drop-down list.
Note
There is no Macintosh printer driver support for this feature.
Phaser® 7300 Color Printer
Driver Features
Creep
7300-58
14