Ricoh G065 Service Manual page 49

[A]
A812I510.WMF
4. Install the spacer [A] (thickness = 2 mm).
NOTE: There are three spacers in the accessory box. Do not lose the other
two spacers (1-mm) because they are used for adjusting the punch
hole position.
5. Install the punch unit [B] and secure it with a long stepped screw [C].
6. Install the punch unit knob [D] (! x 1).
7. Secure the rear of the punch unit (! x 2).
SM
CÓPIA NÃO CONTROLADA
[B]
[D]
1-21
CÓPIA NÃO CONTROLADA
PUNCH UNIT INSTALLATION (A812)
[C]
A812I765.WMF
G065