Ricoh G065 Service Manual page 180

PRINTER ENGINE SERVICE MODE
SP5 Mode Number
5802* Printer Free Run
5803* Input Check
5804*
Output Check
5807* Option Connection Check
02 Bank
03 LCT
04 Finisher
5810 SC Clear
5811* 01 Machine Serial Number
5812 02 Service Fax Number
5828* 25
Network Software Switch
27 Network SYSLOG Server
Address Setting
28 Network Time Server
Address Setting
30 Network Direct Port Number
Setting
32
Network IPX Address Setting
(NetWare)
34 Network Software Switch
Setting (NetWare)
36 Network AppleTalk Module
Setting
37 Network NetNo Setting
(AppleTalk)
38 Network Object Name
Setting (AppleTalk)
G065
CÓPIA NÃO CONTROLADA
Performs a free run. The printer prints the
number of blank prints requested for testing.
[0 ~ 1 /0 / 1 step]
0: Free run mode off.
1: Free run mode on.
Displays the signals received from sensors and
switches. (☛ 5.3.3)
Turns on the electrical components individually
for test purposes. (☛ 5.3.4)
Checks the connectors to the optional peripheral
devices. Execution will return either a "1" or "0":
0: Device not connected correctly.
1: Device connected correctly.
When an SC error is issued for the fusing
system (SC54x), the printer cannot be released
from the SC status by cycling the machine off
and on. The service technician must execute
SP5810 to restore the printer to normal
operation.
Used to input the machine serial number (limit:
11 digits). This is normally done at the factory.
DFU
Enter the telephone number of the service
representative. The fax number is printed
automatically when a service call error occurs.
The number entry is limited to 20 digits,
including hyphens.
Sets the information for the software used on the
network.
[00000000h ~ FFFFFFFh / 00000000h / 1 hex]
Sets the address for the Syslog Server.
[00000000h ~ FFFFFFFFh / 7F000001h / 1 step]
7F000001h (127.0.0.1)
Sets the time server address.
[00000000h / 00000000h / 1 step]
Sets the port number for TCP direct printing.
[1024 ~ 65535 / 9100 / 1 step]
Sets the IPX address used by NetWare on the
network. (Allowed entry: 12 numerics)
Sets the NetWare software information used by
the network.
[0000h ~ FFFFh / 0003h / 1 hex]
Sets the mode for the operation of AppleTalk on
the network with multiple protocols.
2: EtherTalk Phase2
Sets NetNo information using AppleTalk on a
network using multiple protocols. (Range: 12
characters)
Sets the object AppleTalk object name for a
network using multiple protocols.
5-22
CÓPIA NÃO CONTROLADA
Function and [Setting]
SM