Ricoh G065 Service Manual page 41

[C]
[D]
9. Secure the finisher [A] (! x 1).
10. Adjust the securing knobs [B] under the front and rear stands until the finisher
is perpendicular to the floor.
11. Install the shift tray [C] (snap ring x 1).
NOTE: Make sure that the three pegs [D] fit into the slots [E] properly.
12. Connect the finisher cable [F] to the main machine.
13. Turn on the main power switch and check the finisher operation.
SM
CÓPIA NÃO CONTROLADA
1000-SHEET FINISHER INSTALLATION (A681)
[F]
[E]
1-13
CÓPIA NÃO CONTROLADA
A681I706.WMF
[B]
[A]
G065