Ricoh G065 Service Manual page 186

PRINTER ENGINE SERVICE MODE
SP7 Mode Number
Jam Count by Copy Size
7506*
05 A4 H (Sideways)
06 A5 H (Sideways)
14 B5 H (Sideways)
38 LT H (Sideways)
44 HLT H (Sideways)
132 A3 V (Lengthwise)
133 A4 V (Lengthwise)
134 A5 V (Lengthwise)
141 B4 V (Lengthwise)
142
B5 V (Lengthwise)
160 DLT V (Lengthwise)
164 LG V (Lengthwise)
166 LT V (Lengthwise)
172 HLT V (Lengthwise)
255 Other
7803* PM Counter Display
02
7807 SC/Jam Counter Reset
7808 Counter Reset
7816
Print Counter Reset
01 Tray 1
02 Tray 2
03 Tray 3
04 Tray 4
05 LCT
06 By-pass
7832 Self-Diagnosis Result Display
7910 ROM Number
01 System
02 Engine
07 Finisher
09 Bank
10 LCT
11 Print Post
G065
CÓPIA NÃO CONTROLADA
Displays the total number of copy jams by paper
size.
Displays the PM counter since the last PM and
resets the counter for PCU replacement to zero.
When the count exceeds the setting for SP5501-
03, the PCU count warning for replacement is
displayed.
Resets the SC and jam counters. To reset, press
#(Enter).
Resets all counters excluding SP7003-***, 7006-
***, 7007-***. Press #(Enter) to reset.
Resets the total copy count by paper tray. To
reset, press #(Enter).
Use these SP modes when replacing the pick-
up, feed, and separation rollers.
Displays the results of self-diagnostic testing.
When there are no errors, 00/00 is displayed. If
an error occurred, the display will show the SC
number.
Acquires the ROM section number and records
it, and prints the number in the SMC Report.
The ROM section number is not displayed on
the operation panel. This SP appears only in the
SMC report.
5-28
CÓPIA NÃO CONTROLADA
Function and [Setting]
SM