Level 2 Service Manual
Removing the Motor/Vibrator Assembly
6809485A78-O
1.
Remove the battery cover, battery, antenna, keypad bezel, speaker cover,
keyboard stiffener, keypad flex, flip flex connector, transceiver board, flip
assembly, flip display lens, flip sleeve, flip display bezel, display module
assembly as described in the procedures.
2.
Use the flat edge of the disassembly tool to remove the motor/vibrator assembly
from the flip housing (see Figure 26).
motor/vibrator assembly
Figure 26. Removing the Motor/Vibrator Assembly
3.
June 07, 2004
Disassembly
032232o
45