Removing And Replacing The Flip Assembly Sleeve - Motorola A840 Service Manual

Disassembly

Removing and Replacing the Flip Assembly Sleeve

40
1. Remove the battery cover, battery, antenna, keypad bezel, speaker cover,
keyboard stiffener, flip assembly, transceiver board, and flip display lens as
described in the procedures.
2. Grasp the flip assembly and pull firmly as indicated by the red arrows to
remove the flip assembly sleeve (See Figure 21).
flip assembly
Figure 21. Removing the Flip Assembly Sleeve.
3. To replace, insert the flip assembly into the flip assembly sleeve and push
firmly until the flip assembly is fully inserted into the flip assembly sleeve.
4. Replace the flip display lens, transceiver board, flip assembly, keyboard
stiffener, speaker cover, keypad bezel, antenna, battery, and battery cover as
described in the procedures.
June 07, 2004
flip assembly sleeve
A840
040369o
6809485A78-O