Removing The Display Module - Motorola A840 Service Manual

Level 2 Service Manual

Removing the Display Module

6809485A78-O
1. Remove the battery cover, battery, antenna, keypad bezel, speaker cover,
keyboard stiffener, flip assembly, transceiver board, flip display lens, flip
assembly, flip assembly sleeve, flip knuckle, and display module as described
in the procedures.
2. Use the disassembly tool to disconnect the flex connector from the display
module assembly (see Figure 24).
3. Carefully, lift the display module up and away from the remainder of the flip
assembly.
Figure 24. Removing the Display Module
4. To replace, seat the display module back into the flip assembly.
5. Carefully re-connect the flex connector.
6. Replace the display bezel, flip knuckle, flip assembly sleeve, flip assembly, flip
display lens, transceiver board, flip assembly, keyboard stiffener, speaker
cover, keypad bezel, antenna, battery, and battery cover as described in the
procedures.
June 07, 2004
Disassembly
032233o
43