Level 2 Service Manual
Removing and Replacing the Flip Knuckle
G
6809485A78-O
1.
Remove the battery cover, battery, antenna, keypad bezel, speaker cover,
keyboard stiffener, flip assembly, transceiver board, flip display lens, and flip
assembly sleeve as described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Remove the knuckle by removing the hinge assembly side followed by the side
where the flex is routed.
3.
Carefully slide the display flex through the knuckle. Avoid damage to the
display flex (see Figure 22).
Figure 22. Removing the Knuckle.
June 07, 2004
Disassembly
040371o
41