Rfterm (Optional); Avalanche; Software Development; Access Files On The Cf/Sd Card - Honeywell vx6 Reference Manual

the mobile device.

RFTerm (Optional)

Start > Programs > RFTerm
The application can also be accessed by double clicking the RFTerm desktop icon.

Avalanche

The Wavelink Avalanche Enabler installation file is loaded on the VX6; however, the device is not configured to launch the
installation file automatically. The installation application must be run manually the first time Avalanche is used. Following
installation, the Wavelink Avalanche Enabler will be an auto-launch application. This behavior can be modified by accessing
the Avalanche Update Settings panel through the Enabler Interface.

Software Development

See Also: CE API Programming Guide
The CE API Programming Guide documents device-specific API calls for the VX6. It is intended as an addition to Microsoft
Windows CE API documentation.
A Software Developers Kit (SDK) and additional information about software development can be found on the Developer
Portal. Contact Technical Assistance for more information or to access the portal.

Access Files on the CF/SD Card

Click the My Device icon on the Desktop then click the System icon.
A SD/CF card is used for permanent storage of the VX6 drivers, CAB files and utilities. It is also used for registry content back
up.
CAB files, when executed, are not deleted.
Note: Always perform a warm reset (Start / Run / Warmboot) when exchanging one card for another.
3-6