Screen Blanking Cable
The customer must supply their own cable.
The cable must be designed so that pin 7 (RTS – Request to Send Output) and pin 8 (Clear to Send Input) of a D9 female
connector provide continuity only when the vehicle is stopped (for example, via a switch on the accelerator pedal of the fork
truck).
All other pins on the connector must be left unconnected. If pins 7 and 8 do not provide continuity (or the cable is removed), the
VX6 screen remains blank.
Serial Cable
Customer built cable with the following specifications.
2-10
DB9 female
1
Not Used
2
Not Used
3
Not Used
4
Not Used
5
Not Used
6
Not Used
No signal when in motion,
7
Continuity to Pin 8 when stopped
No signal when in motion,
8
Continuity to Pin 7 when stopped
9
Not Used
Function