Honeywell vx6 Reference Manual page 106

Message
Exit ToUser-Registry
read failure
Exit verify password-no
pwd set
Exit verify password-
response from dialog
Found taskbar
Getting address of
keyboard hook init
procedure
Getting configuration
from registry
Getting encrypt pwd
length
Hook wndproc failure
Hook wndproc of open
app failure
Hot key event creation
failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message
received
In app hook:WM_SIZE
In app hook:WM_
WINDOWPOSCHANGED
Initializing keyboard
hook procedure
Keyboard hook
initialization failure
Keyboard hook loaded
OK
L after Ctrl
Loading keyboard hook
3-54
Explanation and/or corrective action
The AppName value does not exist in the registry so user mode cannot be entered.
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that AppLock can disable it in user
mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the registry. This occurs at
initialization and also at entry into user mode. The registry must be re-read at entry
into user mode in case the administration changed the settings of the application
being controlled.
The length of the encrypted password is being calculated.
AppLock is unable to lock the application. This could happen if the application being
locked encountered an error after performing its initialization and shut itself down
prior to being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey configuration the hotkey controller must
be notified. This notification failed.
The user just pressed the configured hotkey.
In addition to preventing the locked application from exiting, AppLock must also
prevent the application from enabling the taskbar and resizing the application's
window. This message traps a change in the window size and corrects it.
In addition to preventing the locked application from exiting, AppLock must also
prevent the application from enabling the taskbar and resizing the application's
window. This message traps a change in the window position and corrects it.
AppLock is calling the keyboard hook initialization.
The keyboard filter initialization failed.
The keyboard hook dll exists and loaded successfully.
Processing the backdoor entry.
When AppLock first loads, it loads a dll that contains the keyboard hook processing.
This message is logged prior to the load attempt.
Level
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_
PROCESSING
LOG_EX
LOG_EX
LOG_
PROCESSING
LOG_ERROR
LOG_EX
LOG_EX
LOG_
PROCESSING