Bluetooth Lxez Pairing - Honeywell vx6 Reference Manual

Bluetooth LXEZ Pairing

The VX6 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over the air. Bluetooth device
connection (or pairing) can occur at distances up to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless
connectivity while Bluetooth is active.
The user will not be able to select PIN authentication or encryption on connections to from the VX6. However, the VX6
supports authentication requests from pairing devices. If a pairing device requests authentication or encryption, the VX6
displays a prompt for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the length of the user's
passcode.
Bluetooth filtered mode simultaneously supports one printer as a slave Bluetooth device and one scanner, either as a slave or
as a master Bluetooth device.
The VX6 does not have a Bluetooth managed LED.
l
The LED on the Bluetooth scanner illuminates during a scanning operation.
l
Barcode data captured by the Bluetooth scanner is manipulated by the settings in the
l
panel applet.
Multiple beeps may be heard during a barcode scan using a mobile Bluetooth scanner; beeps from the mobile Bluetooth
l
scanner as the barcode data is accepted/rejected, and other beeps from the VX6 during final barcode data manipulation.
See also: Start > Settings > Bluetooth
2-4
VX6Scanner Properties control