Applock Help; Applock Error Messages - Honeywell vx6 Reference Manual

AppLock Help

The mobile device won't switch from Administration mode to end-user mode.
If the configuration is valid for one application but not the other, the switch to end-user mode fails. AppLock stays in
Administration mode and is stopped until the Administrator password is entered.
The hotkey sequence needed is not allowed. What does this mean?
When the Administrator is selecting a hotkey sequence to use when switching user modes, they are not allowed to enter key
combinations that are reserved by installed software applications. Only RFTerm key combinations are validated.
When RFTerm is installed on the mobile device and an RFTerm restricted key sequence is specified as a hotkey sequence by
the Administrator, the following error message is displayed in a message box:
Selected hotkey is not allowed. Please reenter.
When RFTerm is not installed on the mobile device, the RFTerm keys are not restricted from use.
Can't locate the password that has been set by the administrator?
Contact Technical Assistance

AppLock Error Messages

Any messages whose first word is an 'ing' word is output prior to the action described in the message. For example, "Switching
to admin-hotkey press" is logged after the administrator has pressed the hotkey but prior to starting the switch process.
For all operations that can result in an error, an Error level message is displayed when a failure occurs. These messages
contain the word "failure". These messages have a partner Extended level message that is logged which contains the word
"OK" if the action completed successfully rather than with an error.
For processing level messages, "Enter..." is logged at the beginning of the function specified in the message and "Exit..." is
logged at the end (just before the return) of the function specified in the message.
Message
Error reading hotkey
Error reading hotkey;
using default
App Command Line=
<Command line>
App= <Application
name>
dwProcessID= <#>
Encrypt exported key len
<#>
Encrypt password
length= <#>
Encrypted data len <#>
hProcess= <#>
Key pressed = <#>
3-50
for information.
Explanation and/or corrective action
The hotkey is read but not required by AppLock.
A hotkey is required. If there is a failure reading the hotkey, the internal factory
default is used.
Command line of the application being locked
Name of the application being locked
Device ID of the application being locked
Size of encrypt export key
The length of the encrypted password.
Length of the encrypted password
Handle of the application being locked
A key has been pressed and trapped by the hotkey processing.
Level
LOG_EX
LOG_ERROR
LOG_
PROCESSING
LOG_
PROCESSING
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX