Honeywell vx6 Reference Manual page 193

For the purposes of this example, the following sample barcode parameters will be used – EAN 128 and Code 128 barcodes.
Some of the barcodes start with '00' and some start with '01'. The barcodes are different lengths.
34 character length with first two characters = "01" (strip first 2 and last 18)
l
26 character length with first two characters = "01" (strip first 2 and last 10)
l
24 character length with first two characters = "01" (strip first 2 and last 8). This 24 character barcode is Code 128.
l
20 character length with first two characters = "00" (strip first 0 (no characters) and last 4)
l
On the Barcode tab, set Enable Code ID to Custom.
Create four custom IDs, using 1 for EAN 128 barcode and 0 for Code 128 barcode.
c1 = Code = ']C1'
l
c2 = Code = ']C1'
l
c3 = Code = ']C0' (24 character barcode is Code 128)
l
c4 = Code = ']C1'
l
Custom symbology setup is assigned in the following manner:
c1 min length = 34, max length = 34, strip leading 2, strip trailing 18, Code ID enabled, Barcode Data = "01"
l
c2 min length = 26, max length = 26, strip leading 2, strip trailing 10, Code ID enabled, Barcode Data = "01"
l
c3 min length = 24, max length = 24, strip leading 2, strip trailing 8, Code ID enabled, Barcode Data = "01"
l
c4 min length = 20, max length = 20, strip leading 0, strip trailing 4, Code ID enabled, Barcode Data = "00"
l
Add the custom symbologies. Refer to the previous section Barcode – Symbology Settings for instruction.
Click the Barcode Data button.
Click the Add button.
3-141