Q u i c k
Charge Status LED Indications
On the base/charger, there is a red LED indicator which uses
flashing patterns to indicate the current charger status. The red
Charge Status LED indicates the following conditions:
•
RED LED OFF — The scanner is not properly inserted or the
battery is not functioning properly.
•
RED LED blinking slowly (1/8 sec. ON, 3/8 sec. OFF) — Bat-
tery charge is pending. This can occur if the batttery tempera-
ture is too high or low or if the battery is deeply discharged.
After several minutes, normal charging should begin.
RED LED ON — The battery is actively charging. Charging
•
will complete in less than 2 hours.
•
RED LED blinking rapidly (1/8 sec. ON, 1/8 sec. OFF) —
Battery charging is complete.
R e f e r e n c e
33