Advertisement
3
1
2
2
4
1
Tether Plate
2
LED Indicators
3
Scan Window
4
Scan Trigger
Optimum Upright Body Posture
Optimum Body Posture
for Low Scanning
ALTERNATE LEFT
DS 3478
72-72130-01 Revision A May 2005
Recommended Usage Guide
http://www.symbol.com/barcode
Regulatory Information
©2005 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or
design. Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus, machine, material, method, or process
in which Symbol products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Symbol products. Symbol and the Symbol logo are registered
trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be
trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
Symbol Technologies, Inc., One Symbol Plaza, Holtsville, N.Y. 11742-1300, http://www.symbol.com
Patents
This product is covered by one or more of the patents listed on the website:
www.symbol.com/patents
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure that you are
adhering to your company's safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural/neutral position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations they are
sold and will be labeled as required. Any changes or modifications to Symbol Technologies
equipment, not expressly approved by Symbol Technologies, could void the user's authority to
operate the equipment.
Regulatory Information is available in French, Italian, German, Spanish (Spain), Portuguese,
Japanese, and simplified Chinese. Please see Web site:
http:// www.symbol.com/manuals and look for your specific product.
Service Information
Before you use the unit, it must be configured to operate in your facility's
network and run your applications.
If you have a problem running your unit or using your equipment, contact
your facility's Technical or Systems Support. If there is a problem with the
equipment, they will contact the Symbol Support Center:
United States
1-800-653-5350
Canada
905-629-7226
United Kingdom
0800 328 2424
Asia/Pacific
+65-337-6588
Australia
1-800-672-906
Austria/Österreich
01-5055794-0
Denmark/Danmark
7020-1718
Finland/Suomi
9 5407 580
France
01-40-96-52-21
Germany/Deutschland
6074-49020
Italy/Italia
2-484441
Mexico/México
5-520-1835
Netherlands/Nederland
315-271700
Norway/Norge
+47 2232 4375
South Africa
11-8095311
Spain/España
91 324 40 00 (Inside Spain)
+34-9-1-320-39-09 (Outside Spain)
Sweden/Sverige
08 445 29 00
Latin America Sales Support
1-800-347-0178 (Inside US)
+1-954-255-2610 (Outside US)
Europe/Mid-East Distributor Operations
Contact local distributor or call
+44 118 945 7360
For the latest version of this guide go to: http://www.symbol.com/manuals.
DS 3478
72-72130-01 Revision A May 2005
http://www.symbol.com/barcode
Optimum Scanning Positions
Aiming
Avoid Extreme Wrist Angles
AND RIGHT KNEES
AVOID BENDING
AVOID REACHING
Country Approval
Regulatory markings are applied to the device signifying the radio (s) are approved for use in the
following countries: United States, Canada, Australia, Japan & Europe
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is
available at http://www2.symbol.com/doc/.
Note
1
: For 2.4GHz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Radio Modules
The DS 3478 Scanners contain an approved radio module. This module is the Symbol Bluetooth radio
Type: 21-64381
Bluetooth Devices
This product is an approved Bluetooth device. BT ID: BT01784
Operation of the device without regulatory approval is illegal.
Power Supply
Use only a Symbol-approved power supply 50-14000-101 output rated 9 Vdc and minimum 1 A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate
any approval given to this device and may be dangerous.
FCC / EU RF Exposure Guidelines
Safety Information
The device complies with Internationally recognised standards covering Specific Absorption Rate (SAR)
related to human exposure to electromagnetic fields from radio devices.
Reducing RF Exposure – Use Properly
It is advisable to use the device only in the normal operating position.
Hand Held Devices:
To comply with FCC RF exposure requirements, this device must be operated in the hand. Other operating
configurations should be avoided.
Radio Frequency Interference Requirements
FOR HOME OR OFFICE USE
Radio Frequency Interference Requirements – Canada
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical
specifications were met.
Marking and European Economic Area (EEA)
Bluetooth for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835 GHz
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Statement of Compliance
Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC.
Declaration of Conformities may be obtained from http://www2.symbol.com/doc/
ALTERNATE LEFT AND RIGHT HANDS
ALTERNATE LEFT AND RIGHT HANDS
TAKING BREAKS AND TASK ROTATION RECOMMENDE D
TAKING BREAKS AND TASK ROTATION RECOMMENDE D
Beeper Indications
Standard Use
Low-medium-high beep
AVOID EXTREME
WRIST ANGLES
Short low-high beep
Parameter Menu Scanning
Short high-low-high-low beep
LED Indications
Standard Use
Charging Use
1
.
Laser Devices
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
Class 1 Laser devices are not considered to be hazardous when used for their
(2) this device must accept any interference received,
intended purpose. The following statement is required to comply with US and
including interference that may cause undesired
international regulations:
operation.
Caution: Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
0 1 2 3 4 5
0 1 2 3 4 5
Short high beep
4 long low beeps
Power up
Bar code decoded [if
Transmission error
decode beeper enabled]
detected; data is ignored
Short high-low beep
Scanner has paired with
Scanner has unpaired
the cradle
from the cradle
Short high-low beep
Successful parameter
Correct programming
setting
sequence performed
Off
Green
No power applied to
Bar code successfully
scanner, or scanner is
decoded
on and ready to scan
Green Slow Flash
Green Fast Flash
Red Flash
Scanner charging in
Scanner charging in rapid
Charging problem
slow mode (used
mode (used when cradle
See Product Reference
when cradle is
is powered from external
Guide for more
powered by host
power supply)
information
cable)
Optimum Body Posture for
Extended Range Scanning
SYMBOL TECHNOLOGIES, INC. One Symbol Plaza Holtsville, New York 11742-1300
Local Contact:
Symbol products using lasers comply with US 21CFR1040.10,
and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser
classification is marked on one of the labels on the device.
0 1 2 3 4 5
0 1 2 3 4 5
4 short high beeps
Low battery
indication
Long low-high beep
Unsuccessful pairing
attempt
Long low-high beep
Incorrect programming
sequence or Cancel
bar code scanned
Red
Data transmission
error or scanner malfunction
Red and Green Flash
Temperature fault
Advertisement
