L S
Setup
1. Identify System Components
2. Connect Cable to the Base/Charger Unit
This procedure depends on which host terminal is used. For
complete details per terminal type, refer to the RL 470 Base Station
Interface portion of the LS 3070 Product Reference Guide.
3. Attach Power Supply
Connect the power supply to the power input port on the rear panel
of the LS 3070 base/interface/charger.
Power Supply
Connection Port
Connect the power supply to a receptacle supplying AC power of
the proper voltage level.
3 0 7 0
LS 3070
Scanner
S c a n n e r
Power Supply
RL 470 Base/Interface/
Charger Unit
2
Host