Using An S-Video Vcr Or Other S-Video Source - Zenith PRO895X Operating Manual And Warranty

USING AN S-VIDEO VCR OR OTHER S-VIDEO SOURCE

Use the Universal Remote to Access On-screen Menus and Make Changes
Once the PRO895X has been installed and set up, follow these simplified instructions for operation. Be sure to install
batteries in the remote. See Remote control section for further instructions regarding remote operation.
S-Video VCR or other S-Video Source Setup Instructions
Connections S-Video Out to S-Video In on PRO895X
VCR Audio Out to Audio In of User-Supplied Stereo System or
Audio Amplifier.
Menus Source Menu -
Select S-Video as input source.
Setup Menu -
Select Aspect Ratio and select proper ratio.
Select Static Setup and adjust if necessary.
Video Menu -
Make S-Video Source adjustments if necessary.
Format If the new S-Video source has not been connected before, it
may be in a format not recognized by the PRO895X. If the
new format is not recognized, save it and give it a name.
Adjustments Make any additional image adjustments as required for this
unique setup. See the "Installation and Setup Guide for System
Installer" for set up instructions.
P A G E 1 2
USERS QUICK REFERENCE GUIDE
Current Source: S-Video
Press to Select Input
Press ENTER to change.
Source Menu with S-Video
selected as Input Source
206-3701