Table of Contents
Advertisement
UNIVERSAL MULTI-BRAND REMOTE CONTROL
USE AUTOFIND TO AUTOMATICALLY SEARCH AND TRY ALL POSSIBLE BRAND CODES
AutoFind
1. Turn on the device you want the remote to control.
2. Press and hold PRG until the indicator light turns on, then
release PRG.
3. Press the key for the device you are trying to program (CABLE,
VCR, AUX, TV).
4. Press 0-0-0 (zero-zero-zero), then press ENTER right away.
5. Aim the remote at the correct device and push the POWER
key (The indicator light will turn off while the POWER key is
pressed). Allow a second to pass, then push the POWER key again.
Repeat until the device turns off.
6. Push ENTER to save the code (The indicator light will flash 3
times and then turn off).
7. Press POWER to turn the device back on.
Notes
• You can quickly get out of Auto Find by pressing PRG.
• If the indicator light stays on while you press Power instead of
turning off, all the codes have been tried and your device can't be
controlled.
• AUTO FIND is an additional way of finding a brand code for con-
trolling auxiliary equipment such as a VCR, DVD player, etc. that is
not available through the regular remote brand code programming
method.
P A G E 1 6
Indicator Light
2
PRG
3
CABLE
VCR
AUX
FLASHBK
SURF
CHANNEL
VOLUME
VOLUME
CHANNEL
1
2
4
5
7
8
4
0
ENTER
MENU
PAUSE
RECORD
TIMER
PLAY
REWIND
STOP
5/7
POWER
TV
MUTE
3
6
9
4/6
QUIT
TV/VCR
SOURCE
FFWD
206-3275-A
Advertisement
Table of Contents
