Page 2
COMPLIANCE: The responsible party for this product’s compliance is: Zenith Electronics Corporation 1-201-816-2000 Marked and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 http://www.zenith.com...
Safety Instructions Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus.
Page 4
Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction Introduction Introduction Controls Controls - This is a simplified representation of a front panel. - Image shown may be somewhat different from your TV. Front Panel Controls Front Panel Controls INPUT MENU ENTER POWER Button INPUT Button VOLUME ( MENU Button Buttons Operation Indicator/...
Introduction Connection Options Connection Options Back Connection Panel Back Connection Panel ANTENNA COMPONENT IN RGB IN AV IN 1 AV OUT VIDEO VIDEO (PC/DTV) MONO AUDIO DIGITAL AUDIO OPTICAL OUTPUT S-VIDEO AUDIO AUDIO RGBDVI HDMI /DVI IN SERVICE ONLY ANTENNA IN AV IN 1 ANTENNA COMPONENT IN...
Page 8
Introduction Front Connection Panel Front Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel.
Introduction Remote Control Key Functions Remote Control Key Functions - When using the Remote Control, aim it at the remote control sensor on the TV. MODE Selects the remote operating mode: INDICATOR LIGHTS TV, VCR, Cable, DVD and Satellite. Show active remote mode Select other operating modes, for the VCR CABLE DVD SAT every time any button is...
Introduction Remote Control Key Functions Remote Control Key Functions TV INPUT • Rotates the input mode between Antenna and Cable. POWER • Video 1-2, Front Video, Component 1-2, VCR CABLE DVD SAT Turns your TV or any other programmed RGB-DTV (or RGB-PC), HDMI1/DVI and equipment on or off, depending on mode.
Installation Installation Installation External Equipment Connections External Equipment Connections Antenna or Cable Connection Antenna or Cable Connection 1. Analog and Digital TV signals provided on one antenna - Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna...
Installation VCR Setup VCR Setup Connection Option 1 ANTENNA Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 DIGITAL AUDIO OPTICAL OUTPUT 1. Connect the audio and video cables from the VCR's output RGB INPUT CABLE jacks to the TV input jacks, as shown in the figure.
Installation DVD Setup DVD Setup How to connect ANTENNA 1. Connect the DVD video outputs (Y, P ) to the COMPO- NENT (Y, P ) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
Installation Monitor Out Setup Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. RGB INPUT S-VIDEO PC/DTV (XGA/ Connect the second TV or monitor to the TV’s MONITOR OUTPUT. 480p/ 720p/ See the Operating Manual of the second TV or monitor for further...
Installation Digital Audio Output Digital Audio Output ANTENNA Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. DIGITAL AUDIO OPTICAL OUTPUT CABLE How to connect DIGITAL AUDIO OPTICAL INPUT (COMPONENT2) 1. Connect one end of an optical cable to the TV Digital Audio COMPONENT DIGITAL AUDIO OPTICAL INPUT...
Installation HDMI HDMI - HDMI , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolu- tions.
Page 17
Installation Reference Reference Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo to RCA type) (not supplied with the product) Owner’s Manual 17...
Page 18
How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET. 2. Turn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3.
Operation Operation urning the TV On urning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Turning on the TV just after installation 1.
TV Setup TV Setup On-screen Menus Language Selection On-screen Menus Language Selection - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use button to select the OPTION menu.
Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search) - Automatically finds all channels available through antenna and cable inputs, and stores them in a channel list in the memory. - Run EZ Scan again after any Antenna/Cable connection changes. 1.
Channel Label Setup Channel Label Setup - Choose preset labels for your channels. - If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan- nel - even if you didn't preset a label for the channel. 1.
ideo Menu Options ideo Menu Options EZ Picture EZ Picture - EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. - When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Custom Daylight...
Audio Menu Options Audio Menu Options Audio Language Audio Language Audio Language English SETUP - Other languages may be available if a digital signal is provided by the broad- Spanish EZ SoundRite casting station. French EZ Sound VIDEO Balance Press the MENU button and then use button to select the AUDIO menu.
Audio Menu Options Audio Menu Options Front Surround Front Surround is a trademark of SRS Labs, Inc. - TruSurround XT technology is incorporated under license from SRS Labs, Inc. - Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Press the MENU button and then use button to select the AUDIO...
ime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup - The time is set automatically from a digital channel signal. - The digital channel signal includes information for the current time provided by the broadcasting station. - Set the clock manually, if the current time is set incorrectly by the auto clock function. 1.
ime Menu Options ime Menu Options Sleep imer Sleep imer - The Sleep Timer turns the TV off after a preset amount of time. Note that this setting is cleared when the TV is turned off. - You can also set up the in the menu.
Operation Option Menu Options Option Menu Options Aspect Ratio Control Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis- played.
Operation Option Menu Options Option Menu Options Caption Caption 1. Press the MENU button and then use button to select the menu. OPTION D D / E E 2. Press the button and then use button to select Caption D D / E E 3.
Caption Option Caption Option - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use button to select the OPTION D D / E E menu. 2. Press the button and then use button to select Caption Option D D / E E...
Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Parental Lock Setup Parental Lock Setup - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. 1. Press the MENU button and then use button to select the menu.
Remote Control Remote Control PIP (Picture-In-Picture) / Twin Picture - PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time.
Moving the PIP sub picture Moving the PIP sub picture In PIP mode, press the button to move the sub picture to a different location on the D D / E E / F F / G G screen. Adjusting Main and Sub Picture Sizes for win Picture Adjusting Main and Sub Picture Sizes for win Picture...
Brief Info. Operation: • Watching TV/DTV/CATV/CADTV • Watching Video1, Video2, Video3 Screen Ratio of Input Signal 4:3 4 : 3 • In Component1, Component2, RGB, Screen Ratio of Input Signal 16:9 16 : 9 HDMI1/DVI, HDMI2 modes, INFO button is not working.
Mute - If you set the Caption on, nothing to do with the MUTE button, Caption function operates as Caption on or off. - When you repeatedly press the MUTE button, the screen is displayed in turn. (Refer to the lower picture) Mute Mute Off : Sound is enabled.
Screen Setup for PC mode Operation Operation • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. • In RGB-DTV mode, SIZE is not available. Adjustment for screen Position, Size, Phase, Reset Adjustment for screen Position, Size, Phase, Reset •After connecting RGB-PC to PC input and checking the screen quality.
Programming the Remote Programming the Remote The Remote Control for your HD receiver is a multi-brand or universal Remote Control that can be programmed to operate most remote-controllable devices of other manufacturers. Note: The Remote Control may not be able to control all models of other brands. 1.
roubleshooting Checklist roubleshooting Checklist • Check whether the TV is turned on. No picture & • Is the power cord inserted into wall power outlet? No sound • Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in.
Page 43
roubleshooting Checklist roubleshooting Checklist No output from one of • Adjust Balance in the AUDIO menu. (Refer to p.25) the speakers Unusual sound from • A change in ambient humidity or temperature may result in the unit turning off inside the TV and does not indicate a fault with the TV.
Maintenance Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1.
ZENITH ELECTRONICS CORPORATION DLP Projection TV Limited Warranty - USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product.