Security Network Nas Guest_Vlan - Planet WGSW-20160HP User Manual

Security Network NAS Guest_VLAN

Description:
Set or show either global state and parameters (use the global keyword) or per-port state of Guest VLAN.
Unless the 'global' keyword is used, the <reauth_max> and <allow_if_eapol_seen> parameters will not be unused.
Syntax:
Security Network NAS Guest_VLAN [global|<port_list>] [enable|disable] [<vid>] [<reauth_max>] [<allow_if_eapol_seen>]
Parameters:
global : Select the global Guest VLAN setting
<port_list>: Select the per-port Guest VLAN setting
(default: Show current per-port Guest VLAN state)
enable|disable
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN state)
<vid>
(default: Show current Guest VLAN ID)
<reauth_max> : The value can only be set if you use the 'global' keyword in the beginning of the command.
The number of times a Request Identity EAPOL frame is sent without response before considering
entering the Guest VLAN
(default: Show current Maximum Reauth Count value
<allow_if_eapol_seen>: The value can only be set if you use the 'global' keyword in the beginning of the command.
disable:The Guest VLAN can only be entered if no EAPOL frames have been received on a port for the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the lifetime of the port
(default: Show current setting)
Default Setting:
disable
: enable : Enable Guest VLAN either globally or on one or more ports
: Guest VLAN ID used when entering the Guest VLAN. Use the 'global' keyword to change it
User's Manual of WGSW-20160HP/WGSW-24040HP series
429