Planet WGSW-20160HP User Manual page 257

16/24-port gigabit 802.3atpoe +4g tp/sfp combo managed switch
Hide thumbs Also See for WGSW-20160HP:
Table of Contents

Advertisement

The Page includes the following fields:
Common Server Configuration
These setting are common for all of the Authentication Servers.
Object
• Timeout
• Dead Time
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns, which are:
Object
• #
• Enabled
• IP Address/Hostname
• Port
• Secret
User's Manual of WGSW-20160HP/WGSW-24040HP series
Description
The Timeout, which can be set to a number between 3 and 3600 seconds, is the
maximum time to wait for a reply from a server.
If the server does not reply within this timeframe, we will consider it to be dead
and continue with the next enabled server (if any).
RADIUS servers are using the UDP protocol, which is unreliable by design. In
order to cope with lost frames, the timeout interval is divided into 3 subintervals of
equal length. If a reply is not received within the subinterval, the request is
transmitted again. This algorithm causes the RADIUS server to be queried up to
3 times before it is considered to be dead.
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
Description
The RADIUS Authentication Server number for which the configuration below
applies.
Enable the RADIUS Authentication Server by checking this box.
The IP address or hostname of the RADIUS Authentication Server. IP address is
expressed in dotted decimal notation.
The UDP port to use on the RADIUS Authentication Server. If the port is set to 0
(zero), the default port (1812) is used on the RADIUS Authentication Server.
The secret - up to 29 characters long - shared between the RADIUS
Authentication Server and the switch.
257

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsw-24040hpWgsw-24040hp4

Table of Contents