Mvr Sfm Information - Planet WGSW-20160HP User Manual

4.8.17 MVR SFM Information

Entries in the MVR SFM Information Table are shown on this Page. The MVR SFM (Source-Filtered Multicast) Information Table
also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by
Port. Different source addresses belong to the same group are treated as single entry.
Each Page shows up to 99 entries from the MVR SFM Information Table, default being 20, selected through the "entries per
Page" input field. When first visited, the web Page will show the first 20 entries from the beginning of the MVR SFM Information
Table.
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting point in the MVR SFM Information
Table.
The MVR SFM Information screen in
The Page includes the following fields:
Object
• VLAN ID
• Group
• Port
• Mode
• Source Address
• Type
• Hardware Filter /
Switch
User's Manual of WGSW-20160HP/WGSW-24040HP series
Figure 4-8-20 appears.
Figure 4-8-20: MVR SFM Information Page Screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128. When there is no any source filtering address,
the text "None" is shown in the Source Address field.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address from the
source IPv4/IPv6 address could be handled by chip or not.
188