Assembling And Installilng The Front Brake Calilper - Yamaha XP500 2001 Service Manual

FRONT AND REAR BRAKES
EAS00635
ASSEMBLING
FRONT BRAKE CALIPER
WARNING
S Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
S Never use solvents on internal brake com-
ponents as they will cause the piston seals
to swell and distort.
S Whenever a brake caliper is disassembled,
replace the brake caliper piston seals.
1. Install:
S bleed screw
S piston seals 1
S dust seals 2
S caliper pistons 3
2. Install:
S brake pad spring 1
S brake pads 2
NOTE:
Install the brake pad with the attached brake
pad spring.
4-40
CHAS
AND INSTALLING
Recommended brake fluid
DOT 4
New
New
THE