Installing The Cylinder Head - Yamaha XP500 2001 Service Manual

CYLINDER HEAD

INSTALLING THE CYLINDER HEAD

1. Install:
S dowel pins
S gasket
New
2. Install:
S cylinder head
NOTE:
Pass the timing chain through the timing chain
cavity.
3. Tighten:
S cylinder head nuts 1
S cylinder head nuts 2
S cylinder head bolts 3
NOTE:
S Apply engine oil onto the threads of the cylin-
der head nuts.
S Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages.
4. Install:
S exhaust camshaft
S intake camshaft
Refer to "INSTALLING THE CAMSHAFTS".
5-17
ENG
35 Nm (3.5 mSkg)
46 Nm (4.6 mSkg)
10 Nm (1.0 mSkg)