FRONT WHEEL AND BRAKE DISC
EAS00525
CHECKING THE FRONT WHEEL
1. Check:
Do not attempt to straighten a bent wheel
axle.
2. Check:
3. Measure:
4. Check:
5. Replace:
a. Clean the outside of the front wheel hub.
b. Remove the oil seals 1 with a flat-head
NOTE:
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel surface.
4-4
S wheel axle
Roll the wheel axle on a flat surface.
Bends ! Replace.
WARNING
S tire
S front wheel
Damage/wear ! Replace.
Refer to "CHECKING THE TIRES" and
"CHECKING THE WHEELS" in chapter 3.
S front wheel radial runout 1
S front wheel lateral runout 2
Over the specified limits ! Replace.
Front wheel radial runout limit
1 mm
Front wheel lateral runout limit
0.5 mm
S wheel bearings
Front wheel turns roughly or is loose ! Re-
place the wheel bearings.
S oil seals
Damage/wear ! Replace.
S wheel bearings
New
S oil seals
New
screwdriver.
CHAS