FRONT WHEEL AND BRAKE DISC
EB700711
ASSEMBLING THE FRONT WHEEL
1. Install:
a. Install the new wheel bearings and oil seals
Do not contact the wheel bearing center race
with the outer race 3 .
NOTE:
Use a socket 4 that matches the diameter of
the wheel bearing outer race and oil seal.
2. Install:
EAS00542
INSTALLING THE FRONT WHEEL
1. Lubricate:
2. Install:
NOTE:
S Make sure that the speed sensor unit and the
S Make sure that the slot a in the speed sensor
4-7
S wheel bearings
in the reverse order of disassembly.
CAUTION:
1 or balls 2 . Contact should be made only
S oil seal
1
New
S wheel axle
S oil seal lips
S speedometer drive gear
S speedometer driven gear
Recommended lubricant
Lithium soap base grease
S speed sensor
wheel hub are installed with the two projec-
tions meshed into the two slots respectively.
fits over the stopper b on the outer tube.
CHAS