Updating Device Drivers - Gateway 400 Notebook User Manual

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.
Important
To update device drivers:
1
Insert the red Gateway CD into the CD, DVD, or recordable drive. If the
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
the CD, DVD, or recordable drive).
4
Click .
OK
5
If this is the first time you have inserted the red Gateway CD, accept the
End User License Agreement (EULA) by clicking
clicking
Continue
starts and the
6
Click the
7
Click
Check Now
If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the red Gateway CD or the Gateway
Technical Support Web site (www.gateway.com/support).
If your system came equipped with an internal embedded
wireless device, see "Safety, Regulatory, and Legal
Information" on page 265 for general wireless regulatory
and safety guidelines. To find out if your system has an
internal wireless device, check the label (see "Identifying
your model" on page 10).
, then click . The Run dialog box opens.
Run
text box, type d:\runmenu.exe (where d is the drive letter of
. The Gateway Driver and Application Recovery program
Drivers and Application Recovery
tab.
Web Updates
. The Connect window opens.
www.gateway.com
Updating device drivers
, then
Yes, I accept it
tab appears.
217