Gateway 400 Notebook User Manual page 132

Chapter 7: Sending and Receiving Faxes
To configure Microsoft Fax:
1
Click
Console
2
On the Welcome to Fax Configuration Wizard screen, click
Information screen opens.
3
Type the information about yourself that you want to appear on your fax
cover page, then click
screen opens.
4
Click the arrow to open the
modem you are using to send and receive faxes.
5
If you want the modem to automatically answer the telephone in order
to receive faxes, click the
6
Click
7
Type the transmitting fax identifier information. This identifier
information is required by law. You can type up to 20 characters in the
text box. We suggest using eight characters for your identifier name,
followed by 12 characters for your telephone number.
122
, ,
Start All Programs Accessories
. The Fax Configuration Wizard opens.
Next
. The Transmitting Subscriber Identification (TSID) screen opens.
Next
www.gateway.com
,
Communications
. The Select Device for Sending or Receiving Faxes
Please select the fax device
check box.
Enable Receive
, , then click
Fax Fax
. The Sender
Next
list, then click the