Table of Contents
Advertisement
Updating device drivers
The System Restoration Kit contains a device driver update utility that works
over the Internet. If you do not have an Internet Service Provider, the update
utility works by direct dialing the device driver update service.
Help and
Support
Important
To update device drivers:
1
Place Disc 1 of the System Restoration Kit into your CD/DVD drive. The
System Restoration Kit program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
of your CD/DVD drive).
4
Click
OK
5
If the Welcome to the System Restoration Kit window opens, close it by
clicking
6
Click the
For more information on updating device drivers, click
Start, then select Help and Support.
If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the Gateway System Restoration Kit or the
Gateway Technical Support Web site.
If your system came equipped with an internal embedded
wireless device, see "Safety, Regulatory, and Legal
Information" on page 221 for general wireless regulatory
and safety guidelines. To find out if your system has an
internal wireless device, check the label (see "Identifying
your model" on page 9).
, then select
. The Run dialog box opens.
Run
text box, type D:\RUNMENU.EXE (where D is the drive letter
. The System Restoration Kit program starts.
.
OK
tab.
Update
www.gateway.com
Updating device drivers
191
Advertisement
Table of Contents
Troubleshooting
