Updating Device Drivers - Gateway Solo 3450 User Manual

Updating device drivers

The System Restoration Kit contains a device driver update utility that works
over the Internet. If you do not have an Internet Service Provider, the update
utility works by direct dialing the device driver update service.
Help and
Support
To update device drivers:
1
Place Disc 1 of the System Restoration Kit into your CD/DVD drive. The
System Restoration Kit program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
of your CD/DVD drive).
4
Click
OK
5
If the Welcome to the System Restoration Kit window opens, close it by
clicking
6
Click the
7
Click
Check Now
8
Install available updated device drivers by following the on-screen
instructions. Depending on the device driver you are updating, you may
only need to restart your computer to complete the installation. However,
if a setup wizard opens when you restart your computer, follow the
on-screen instructions.
For more information on updating device drivers, click
Start, then select Help and Support or Help.
, then select . The Run dialog box opens.
Run
text box, type D:\RUNMENU.EXE (where D is the drive letter
. The System Restoration Kit program starts.
.
OK
tab.
Update
. The Connect window opens.
www.gateway.com
Updating device drivers
205