8. Remote Scan
Configuring Discovery Settings
You can configure the discovery settings.
1) Devices
2) Network - Enable IPX/SPX Search
3) Network - Enable TCP/IP Search
120
Click the arrow button to display the poll down list and check the model name that
you want to search.
This is disabled because the Remote Scan driver does not support the IPX/SPX
connection.
Select this to search for devices connected to the TCP/IP network. This is available
only when the TCP/IP protocol is installed.
When this is enabled, select how it searches devices in the TCP/IP network.
-
Search local subnet — Select this to search devices in local subnet.
-
Specify a range — Select this to search devices in specific range of IP
addresses. When this is selected, enter the IP addresses in "From" field and
"To" field to specify the range.
Scanning Guide — How to User Remote Scan Driver