Operations That Cannot Be Combined; Operations Where The Setting Specified Last Is Given Priority - Oce CS230 Phase 3 User Manual

4
4.2

Operations that cannot be combined

Certain copy settings cannot be used together.
Specifying settings that cannot be combined will result in one of the
following.
- The setting specified last is given priority. (The setting specified first is
canceled.)
- The setting specified first is given priority. (A warning message appears.)

Operations where the setting specified last is given priority

The procedure for setting the "Booklet" function after selecting the "2
Position" Staple setting is described below.
1
Select the [ 2 Position] Staple setting.
4-6
Basic copy operations
CS230 (Phase 3)