Regency HZI234E-NG Owners & Installation Manual page 25

7) Connect the red/black wires (tagged battery).
8) Install 4 - AA batteries. (Do not connect a 9V battery).
9) Reattach the battery pack holder to the faceplate and ensure the loose
wires are away from the side of the fi rebox.
®
Regency HZI234E Direct Vent Gas Insert
10) Connect the fan rheostat to the wires from the unit behind the left side
of the backing plate as shown below.
NOTE: Ensure connectors are tucked in behind the back of the faceplate
panel.
11) Hook the front faceplate over the installed backing plate.
12) Install the bottom louver by placing the louver tabs into the slots on the
bottom of the unit - in locations shown below.
Install logo in lower left hand corner of the front low profi le faceplate.
Logo
Bottom louver
INSTALLATION
25