Call Duration Timer; Auto Timer; Timer Function; Alarm Reminder Messages - Samsung iDCS 500 User Instruction

CALL DURATION TIMER

The system can be set to automatically time outside calls. A few seconds
after you dial a telephone number, the timer appears in the display. It
appears immediately for incoming calls. The call timer continues for the du-
ration of the call. Call duration times are displayed in minutes and seconds.
If a call lasts longer than 60 minutes, the timer restarts.
You can press the TIMER key to manually begin timing a call. Press it again
to stop timing. If you press it while the automatic timer is on, the call dura-
tion time is restarted.

AUTO TIMER

Display keyset users may have the timer automatically start when they
answer incoming calls or after a short delay on an outgoing call.
• With the handset on-hook, press TRSF and then dial 110.
• Dial 011 to turn the auto timer on or 010 to turn it off.
• Press TRSF to store your selection.

TIMER FUNCTION

Display keyset users may use this feature as a simple stopwatch.
• When the keyset is idle, press the TIMER button to start timing.
• Press the TIMER button again to stop timing.
• Read the elapsed time in the display.
• Lift the handset and replace it. The display will return to date and time.
VIEWING MESSAGE INDICATIONS
You can view all of your message indications before you return them:
• With the handset on-hook, press the MSG key with the red flashing light.
• The first station that left a message indication will be displayed.
• Press the UP and DOWN arrows to scroll through the stations that left
message indications. Use the soft keys to reply, clear or advance to the
next message.
• Press the ANS/RLS key to return your keyset to the idle condition.
46

ALARM REMINDER MESSAGES

When you use the alarm/appointment reminder feature, you create a 16
character reminder message. When the alarm rings, your message will ap-
pear instead of [ALARM REMINDER]. To program reminder messages:
• Press TRSF and then dial 116.
• Dial the alarm number 1, 2 or 3.
• Dial the time you want the alarm to go off. Enter the time as HHMM (hours
and minutes) using the 24 hour clock.
• Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.
• Write your message using the dial pad keys. Each press of a key selects
a character. Pressing the next key moves the cursor to the next position.
For example, if your message is "TAKE MEDICATION," press 8 once to
get the letter "T." Press 2 once to get "A." Press 5 twice to get "K." Con-
tinue selecting characters from the following table to complete your mes-
sage.
• Press the TRSF key to store the alarm and reminder message.
• Repeat for each alarm if needed.
COUNT 1 2
DIAL 0 Q Z
DIAL 1 space ?
DIAL 2 A B
DIAL 3 D E
DIAL 4 G H
DIAL 5 J K
DIAL 6 M N
DIAL 7 P R
DIAL 8 T U
DIAL 9 W X
DIAL ✱
: =
NOTE: When the character you want appears on the same dial pad key as
the previous character, press UP to move the cursor one space to the right.
3 4 5
. ) 0
, ! 1
C @ 2
F # 3
I $ 4
L % 5
O ^ 6
S & 7
✱
V 8
Y ( 9
✱
[ ]
47